Removing Devices - Siemens Synco 900 Mounting And Commissioning

Inputs (Heating operating mode, summer operation, H/C
changeover, absence, twilight):
Main menu > Commissioning > Wiring test > Inputs:
Outputs (heat demand relay, heat demand DC 0..10 V, apartment
pump, summer operation, status output, window / door state):
Main menu > Commissioning > Wiring test > Outputs:

Removing devices

Using function "Disconnect device", devices connected to the central
apartment unit can be removed again from the central unit. In that
case, any binding information contained in the device to be discon-
nected is also deleted.
You find function "Disconnect device" on the menu you already used
with "Connect device":
Main menu > Commissioning > RF connections > Rooms >
Room X > Disconnect device:
Main menu > Commissioning > RF connections > Smoke detector >
Room X > Disconnect device:
Main menu > Commissioning > RF connections > Meteo sensor >
Disconnect device:
Main menu > Commissioning > RF connections > Switching groups >
Switching group X > Disconnect device:
Main menu > Commissioning > RF connections >
Switching group relay > Switching group X > Disconnect device:
Main menu > Commissioning > RF connections > Doors > Door X >
Disconnect device:
Main menu > Commissioning > RF connections > Faults > ... >
Disconnect device:
Main menu > Commissioning > RF connections > Inputs > ... >
Disconnect device:
Main menu > Commissioning > RF connections > Outputs > ... >
Disconnect device:
Main menu > Commissioning > RF connections > RF repeater >
RF repeater X > Disconnect device:
Main menu > Commissioning > RF connections > RF repeater >
Other RF devices > Disconnect device:
You are now prompted to press the binding button on the device to
be disconnected. The action required on the device is the same as
that required for making a connection.
A successful Disconnection is shown on the display of the central
apartment unit and be confirmed with a beep. Close the disconnec-
tion process by pressing the Menu/ok button.
58/88
Siemens
Building Technologies
Synco 900
Commissioning the system
CE1C2707en
05.07.2007