Configure Light Status Indication - Siemens Synco 900 Mounting And Commissioning

Main menu > Commissioning > Basic configuration > Doors > Door X
> Function:
Door
1
2

Configure light status indication

The central apartment unit is capable of indicating the light status of
4 selected lamps.
Each of the 4 lamps can be assigned a name which appears on the
info page.
Main menu > Commissioning > Basic configuration > Light state >
Lamp X > Lamp X:
Activate one of the lamps by setting the function to "Active":
Main menu > Commissioning > Basic configuration > Light state >
Lamp X > Function:
Lamp
1
2
3
4
Info page "Light state" is displayed only if at least one of the 4
lamps is activated.
To indicate the light status, switch or dim actuators of any
manufacture can be used which, via S-Mode KNX TP1 *,
communicate with the central apartment unit.
* The connection of the relevant S-Mode objects of the central apartment
unit to the relevant S-Mode devices on KNX TP1 is made with a commis-
sioning tool (ETS)
Siemens
Building Technologies
Factory setting
--- (inactive)
--- (inactive)
Factory setting
--- (inactive)
--- (inactive)
--- (inactive)
--- (inactive)
Synco 900
Commissioning the system
Your setting
--- (inactive)
Active
--- (inactive)
Active
Your setting
--- (inactive)
Active
--- (inactive)
Active
--- (inactive)
Active
--- (inactive)
Active
Door name
.....................
.....................
Name of lamp
.....................
.....................
.....................
.....................
25/88
CE1C2707en
05.07.2007