Recommended Bit/Byte Swap Settings; Table 7-9 Recommended Bit/Byte Swap Setting - Hitachi S10mini LQS070 Hardware Manual

7.9.3

Recommended bit/byte swap settings

It is recommended that you perform bit/byte swap setup in accordance with the master
device connected to the D.Station (see Table 7-9). The best settings may vary depending
on how the application program handles data. You do not have to comply with the setup
instructions stated in Table 7-9.
No. DeviceNet master device
1 S10mini D.NET
2 R600 RIF-D
3 Other DeviceNet master
devices

Table 7-9 Recommended Bit/Byte Swap Setting

D.Station setup
Bit swap
OFF
OFF
ON
7 COMMUNICATION FUNCTION
Byte swap
ON Applies to situations where the bit
inversion mode is OFF for D.NET. If the
bit inversion mode is ON, the bit swap
feature should be ON.
ON
ON Applies to situations where the data from
the D.Station is accessed word by word.
− 75 −
Remarks
−