Figure 1-2 Output Module Specifications; Table 1-1 Operating Environment - Hitachi S10mini LQS070 Hardware Manual

Environment
Operate the Programmable Controller in the following environment:
Supply voltage
Amplitude range
Temperature
Relative humidity
Vibration resistance
Shock resistance
Ambient air
* The amplitude range varies depending on the employed power supply module.
Output module
Furnish the output module load power supply with a fuse for the protection of load
short-circuits.
Ensure that the employed fuse is rated to match the load. If the employed fuse rating is higher
than specified, the printed circuit boards, case, and other items may burnout when the load is
shorted.

Table 1-1 Operating Environment

100 to 120 VAC,
single-phase, 50/60 Hz±4%
85 to 132 VAC
At operation: 0 to 55°C; storage: -20 to 75°C
At operation: 30 to 90% RH; storage: 10 to 90% RH
2
5.8m/s (1000 rpm)
2
98m/s
3
Dust: 0.1 mg/m or less (given that there is no corrosive gas)
S10mini
(output module)

Figure 1-2 Output Module Specifications

24 VDC
20.4 to 28.8 VDC
Fuse
Power
supply
Load
− 3 −
1 BEFORE USE
100 to 110 VDC
85 to 132 VDC