Chapter 1 Introduction - Estun E10 Operation Manual

Chapter 1
Thanks for buying E10 CNC controllers. Before using our E10 CNC controllers, I
suggest you read this manual very carefully.
Compared with conventional CNC units, E10 has much better cost performance, good
looks and higher brightness display, in addition, it also has many special functions to meet the
special need of press-braking machine and shearing machinery, such as back gauge single
directional gap prompt, X/Y axis screw pitch tolerance offset, soft limit position, time relay,
and so on.
The major functions of E10:
-
back gauge single directional gap prompt
-
soft limit position
-
time relay
- counting
-
Reference point searching automatic
Basic functions
E10-D CNC unit special for press-braking machine
- Press-braking counter
-
X/Y axis integration display
- X axis single directional positioning gap prompt
- Y axis screw rod transmitting gap auto offset
- X/Y axis soft limit position
- X/Y axis position teach-in
- 4 groups of internal time replay
- Free setting of proportional factors
- Metric / English conversion
-
Position in memory in case of power loss
E10-S CNC unit special for Shearing machine
- Cutting counter
- X axis single directional positioning gap prompt
-
X axis soft limit position
-
X axis position teach-in
-
4 group of internal time replay
-
Free setting of proportional factors
-
Position in memory in case of power loss
-
Metric / English conversion
The above technical specifications are to change without further notice!
Introduction
Page 2 of 28
E10 Operation Manual V1.15