Table of Contents
Advertisement
Chapter 6
6.1 Set machine parameters
1、Press
2、Press
'
'
3、Press
4、The first line of digital display shows the parameter num and the second line shows
the value of the parameter. Only the value of flashing digit can be edited.
Notice：
1. By pressing
or negative when editing a parameter.
Every parameter has its range. If the preset value exceeds the range, then the parameter
2.
will be the min limits as its value.
3.the range of press-braking machine is"0—75"，and the value will be set as '1' if the
preset value exceeds the range.
4. the range of shearing machine is "0—47"，and the value will be set as '1' if the preset
value exceeds the range.
6.2 Parameters description
Press-braking machine parameters:
Parameter No.
PAN01
PAN02
PAN03
PAN04
PAN05
PAN06
PAN07
PAN08
Machine Parameters
to enter machine parameter interface.
to confirm the edit parameter 'PAN－00', then input pin number
；
to confirm, and the interface shows
and
on the sixth digit ,you can select the value as positive
Parameter names
Decimal point position on X-axis
Decimal point position on Y-axis
Multiple factor of X-axis
Multiple factor of Y-axis
Dividing factor of X-axis
Dividing factor of Y-axis
Screw gap of X-axis
Screw gap of Y-axis
Page 17 of 28
E10 Operation Manual V1.15
；
；
Default
User's setting
1
2
4
4
1
1
0
0
Hide quick links:
Advertisement
Table of Contents
