Introduction; Led Lamp; Keys - Estun E10 Operation Manual

4.2 introduction

4.2.1 LED lamp

There's one LED lamp in the front panel:
LED lamp behind the first line digital display
------------Alarm LED. It will be lid if there's no one-side positioning on
X-axis,which means screw rod gap still remains.

4.2.2 Keys

There are 5 membrane keys in front panel which could be divided into function key,
positioning keys and numerical keys according to the functions.
Function keys:
----------------------Mode key. Used for switching interface or canceling the modification
Positional keys:
----------------------Leftward moving key, used during parameter editing to move the
----------------------Enter key. Used for confirming the modification of the parameters.
Numerical keys:
----------------------Increase key, used during parameter editing to increase current
----------------------Decrease key, used during parameter editing to decrease current
of the parameters.
cursor from current digit to one digit leftward.
parameter value with 1.(when current value is 9, it will be 0 after
pressing this key.)
parameter value with 1.(when current value is 0, it will be 9 after
pressing this key.)
Page 11 of 28
E10 Operation Manual V1.15