To view last calibrated data
3200P pH Meter User Guide
From the initial state display or measuring mode, press
[View] and select pH Last Calib (last calibrated data) as shown
in
Figure
26.
Figure 26
View pH Last Calib Data
Figure 27
shows an example.
Figure 27
View pH Last Calib Data
The upper area shows the last calibrated data. The bottom
area shows the current buffer groups. Press the arrow keys
to view detailed calibrated data.
To print current calibration data, connect the meter to the
PC with a USB cable and press [Output]. See
data"
on page 41. The printout format is shown in
on page 46.
Operation
2
also"To output
Figure 28
45