Agilent Technologies 3200P User Manual page 30

2 Operation
C A U T I O N
30
Figure 14 System setup
3 Use the arrow keys to select the desired parameter.
4 Press [Setup] to modify the corresponding parameter.
Enter the new setting using the keypad.
5 Press [Enter] to save the change, exit System Setup, and
return to the initial state.
The Auto Delete function is designed for cases when stored data
reaches the limit of the memory of the meter, which allows you to
choose whether to automatically overwrite the old data with the new
data. For example, the meter stores up to 200 sets of data. When the
user wants to store the 201
the meter deletes the first set of data and stores the 201
Delete is disabled, the new data will not be stored.
If the Auto Delete function is disabled, the meter will remind the user
to store new data when the meter runs out of memory
To set the date and time
1 From the system setup screen, select Time.
2 Press [Setup] to open a data entry window as shown in
Figure 15 on page 31.
st
set of data and Auto Delete is checked,
3200P pH Meter User Guide
st
data. If Auto