To Measure Mv Value; To Measure Temperature; To Turn Off The 3200P Ph Meter - Agilent Technologies 3200P User Manual

2 Operation

To measure mV value

To measure temperature

To turn off the 3200P pH Meter

40
In any measuring mode, the meter always displays the
current pH and mV value.
In any measuring mode, the meter will display the current
temperature value.
After using the meter, ensure you have pressed [Save] to
save data. Then, press [On/Off] to turn off the meter.
When not in use, all electrodes should be soaked in distilled
water. If the meter is out of use for a long time, do the
following:
• Disconnect the power adaptor from the power line to
avoid damaging the power adaptor and the meter.
• The socket of the meter must be kept clean and dry.
Avoid contact of the socket with acidic, alkaline, and salt
solution.
• If disconnecting the pH electrode, install the short- circuit
plug onto the meter to prevent damage to the meter.
• Store the electrode in reference filling solution. For
refillable electrodes, plug the filling hole. If the electrode
is out of use for a long time, put it back in the box and
store it at ambient temperature.
3200P pH Meter User Guide