Meter Self-Diagnostics And Messages; Severe Errors - Agilent Technologies 3200P User Manual

3 Troubleshooting and Maintenance

Meter Self-Diagnostics and Messages

Severe errors

56
The meter supports self- diagnosis, which can find some
common errors caused by meter, electrode, solution, or
operation. It deals with these errors differently according to
their severity.
There are two levels of severity: Severe system errors hinder
further use of the meter or make the meter unable to finish
necessary tasks. In this case, replacement or maintenance of
the meter is required.
Minor errors, which are prompts or warnings, are caused by
various reasons and can be corrected in several ways.
However, you must pay attention to these errors to ensure
measurement integrity and reliability. If you ignore these
error messages the operation can continue.
When severe errors occur in the meter, the meter will shut
down and display an error message similar to
this case, the only operation that can be performed is to
turn off the meter.
Figure 29 Severe error message
Figure 29. In
3200P pH Meter User Guide