Troubleshooting - Hamron 220-137 User Instructions

EN
• Remove the water-jet pipe from the spray gun and clean dirt from the nozzle opening using the
tool supplied (Figure 11) and flush�
10
Disconnect the high-pressure washer from the power mains prior to carrying out maintenance or
inspection�
Check the following before contacting a service workshop:
Problem
The high-pressure washer
won't start
Variable pressure
50
11

TROUBLESHOOTING

cause
The high-pressure washer is
not plugged in�
Faulty power socket�
The fuse has tripped�
Faulty extension cable�
The pump sucks air�
The valves are dirty, worn
or have stuck�
Worn pump seals�
Recommended action
Plug in high pressure washer�
Try another socket�
Replace fuse� Turn off other
machines�
Try using the appliance without
an extension cord�
Check that hoses and
connections are airtight�
Clean and replace or contact
the retailer�
Clean and replace or contact
Jula's service department�