Raven VSN Installation Manual page 15

6. Using the provided M8 hardware, mount the debris shield and brackets to the back of the VSN camera as
shown in Figure 4 on page 11.
NOTE: The camera must be mounted with the lens at the top when mounted to the equipment.
FIGURE 4. VSN Camera and Mounting Bracket Assembly
M8 Hardware
(Bolt, Lock
Washer, Washer,
Rubber Isolator)
7. Finally, use the remaining M8 hardware to secure the camera mounting bracket assembly to the base bracket
on the machine frame.
FIGURE 5. VSN Camera Mounted to Boom Cradle
Installation: Mounting VSN
Rubber Isolator
M8 Hardware (bolt,
washer, nylon lock nut)
INSTALLATION
11