Oracle Solaris Cluster 3.3 System Manual page 45

This procedure defines Node A as the node with the host adapter on SCSI bus A. This host
■
adapter is the host adapter that you are replacing. Node B is the node that remains in service.
This procedure provides the long forms of the Oracle Solaris Cluster commands. Most
commands also have short forms. Except for the forms of the command names, the commands
are identical.
To perform this procedure, become superuser or assume a role that provides
solaris.cluster.read and solaris.cluster.modify RBAC authorization.
Determine the resource groups and device groups that are running on Node A.
1
# clresourcegroup status -n nodename
# cldevicegroup status -n nodename
Note the device groups, the resource groups, and the node list for the resource groups. You will
need this information to restore the cluster to its original configuration in
procedure.
Move all resource groups and device groups off Node A.
2
# clnode evacuate fromnode
Without powering off the node, shut down Node A.
3
For the procedure about how to shut down and power off a node, see your Oracle Solaris
Cluster system administration documentation. For a list of Oracle Solaris Cluster
documentation, see
From Node B, halt I/O activity to SCSI bus A.
4
For instructions, see the Sun StorEdge RAID Manager User's Guide.
From the controller module end of the SCSI cable, disconnect the SCSI bus A cable. This cable
5
connects the controller module to Node A. Afterward, replace this cable with a differential SCSI
terminator.
Restart I/O activity on SCSI bus A.
6
For instructions, see the Sun StorEdge RAID Manager User's Guide.
If servicing the failed host adapter affects SCSI bus B, proceed to
7
If servicing the failed host adapter does not affect SCSI bus B, skip to
8
From Node B, halt I/O activity to the controller module on SCSI bus B.
9
For instructions, see the Sun StorEdge RAID Manager User's Guide.
Chapter 1 • Installing and Maintaining a SCSI RAID Storage Device
"Related Documentation" on page
Maintaining Storage Arrays
Step 25
6.
Step 9.
Step 12.
of this
45