Provisioning Tasks; Setting Date And Time - ADC HiGain H2TU-C-388 List 7F Manual

Provisioning
P T
ROVISIONING
After the H2TU-C is successfully installed, perform these basic provisioning tasks:
•
Set date and time (see
•
Set circuit ID numbers (see
•
Make any configuration changes (see
•
Clear history, alarm, and event log screens to remove miscellaneous data acquired during startup (see
"Clearing the History, Alarm, and Event Log Screens" on page

Setting Date and Time

1 Press C to select the Config menu.
2 Use the and
↑ ↓
3 Type the date in the format indicated, then press
4 Type the time in the format indicated (entering seconds is optional), then press
12
ASKS
"Setting Date and Time"
"Setting Circuit ID Numbers" on page
"Configuring the System" on page
Figure 4. Config Menu - Date and Time
arrow keys to select Date and Time, then press
July 21, 2003
on this page).
13).
13).
24).
ENTER
ENTER .
LTPH-UM-1214-02
.
ENTER .
H2TU-C-388 List 7F