Clearing The History, Alarm, And Event Log Screens; Config Menu - Master Clear - ADC HiGain H2TU-C-231 User Manual

LTPH-UM-1109-01, Issue 1

Clearing the History, Alarm, and Event Log Screens

Select Master Clear to clear the History, Alarm, and Event Log screens after the system has been installed and is
functioning properly. This removes miscellaneous data acquired during the startup session and ensures collection
of accurate and meaningful data thereafter.
Monitor Performance
Clear ALL performance, alarm and event log entries.
ID: xxxx--xxxx—-xxxx--xxxx
To clear the Event Log, press
To clear an individual history or alarm screen, do the following:
1 Press P to select the Performance screen.
2 Press the SPACEBAR
H2TU-R HDSL2), then press
SPACEBAR
3 Press the
48-Hour History, or 31-Day History), and press
– Selecting 31-Day History allows you to clear the current, 25-hour, 48-hour, and 31-day
performance history screens for the selected interface.
–
Selecting Alarm History allows you to clear the alarm history screen for the selected interface. For
information about the DS1 and HDSL2 Alarm screens, see
page 35.
4 Press L to clear the screen.
To clear ALL history, alarm, and event log screens by this method:
C
1 Press to select the Config screen.
2 Use the and
Y
3 Press to clear all screens.
H2TU-C-231 List 2
Event Log Config
+----------------------+
| Standard Options ->
| ADC Options
| BERT Generator
| Date and Time
| Master Clear
| Set Factory Defaults |
+----------------------+
09/01/2001 12:30:01
Figure 10. Config Menu - Master Clear
E
to select the Event Log screen, then press
to select an interface (H2TU-C DS1, H2TU-R DS1, H2TU-C HDSL2, or
ENTER
.
to select the type of statistics (Current, Alarm History, 25-Hour History,
arrow keys to select Master Clear.
January 9, 2002
Inventory Report Rlogon
|
-> |
-> |
-> |
|
Are you sure (Y/N)?
H2TU-C
L
to clear the screen.
ENTER after your selection.
Table 11 on page 34
Provisioning
Help
System: OK___
and Table 12 on
23