External Venting - Fisher & Paykel DE5060M1 Installation Instructions Manual

Location
Venting
Correct installation is very important for all dryers to ensure maximum efficiency and safety.
Never run the dryer unless the airflow system is free from obstruction.
There must be adequate ventilation to avoid the back flow of gases into the room from appliances burning fuels,
including open fires, when operating the dryer.
Exhaust air must not be discharged into a flue which is used for exhausting fumes from appliances burning gas or other
fuels.

External venting

Your dryer has been designed to be vented outside to provide the following advantages:
https://producthelp.fisherpaykel.com/au/Dry/Dryers/Vented/DE5060M1/User_Guide_DE5060M1/03_Installation_instructions
• The dryer must be installed in a well-
ventilated, dust- free environment.
• The dryer must not be installed on
any textured floor coverings (eg
carpet, rugs).
• Do not install the dryer behind a
lockable door, sliding door, or behind
a door where the hinge is on the
opposite side to that of the dryer in
such a way that the full opening of
the door is inhibited. Ensure the dryer
door can always be opened fully.
• Do not install the dryer outside, in a
damp place, where there is a risk of
freezing, where it may be rained on,
in direct sunlight or close to a source
of heat.
• Do not place your dryer on top of its
power cable.
Updated: Sun, 09 Feb 2020 16:40:35 GMT
Powered by
2