Installation - Ranger R76LT Installation And Operation Manual

Installation

This section describes how to install your Tire Changer. Perform the tasks in the order presented.
⚠
DANGER
Installation Safety Rules
Pay attention at all times during installation.
clear of moving parts. Keep hands and fingers away from pinch points.
⚠
WARNING
Use caution when unpacking the Tire Changer from its shipping container and setting it up. The Tire
Changer is heavy and the weight is not evenly distributed; dropping or knocking over the unit may
cause equipment damage and personal injury.
Only experienced, trained technicians may install the Tire Changer. In particular, all electrical work
must
be done by a licensed, certified Electrician.
⚠
CAUTION
R76 Series of Tire Changers
When you even hear the words "Tire Changer," you need to remember that being in
close proximity to one is a serious endeavor with potentially life-threatening risks.
Only allow appropriately trained, authorized, supervised personnel to install the Tire
Changer. Do not assume that nothing bad is going to happen this time
just because nothing bad happened last time
You must wear OSHA-approved (publication 3151) personal protective equipment
at all times when installing, using, maintaining, or repairing the Tire Changer: leather
gloves, steel-toed work boots, eye protection, back belts, and hearing protection.
Certain parts of installing the Tire Changer are difficult for just one person. BendPak
Ranger strongly recommends having at least two or more persons work together
to install the Tire Changer.
Use appropriate tools and equipment. Stay
12
.
Safety is your top priority
P/N 5900346 — Rev. C — Dec. 2019
.