Ranger R76LT Installation And Operation Manual page 48

13. If using the R76LT, position the Assist Tool, if desired, to the left of the Mount/Demount Head
(about 20% of the total distance around the Tire), with it pushing down on the Sidewall of the Tire.
Then position the Bead Roller, if desired, to the left of the Mount/Demount Head, with it also
pushing down on the Sidewall of the Tire.
Top view. Not necessarily to scale.
When you start rotating the Tire, the Assist Tool, if used, moves with the Tire. The Bead Roller, if
used, stays in the same spot.
14. Press down and hold down the Turntable Foot Pedal to move the Turntable clockwise.
If using the Bead Lifting Tool or Assist Tool to hold down the Sidewall, move them around with the
Tire as it rotates.
15. If you run into any difficulty as the Tire rotates, take your foot off the Turntable Foot Pedal to stop
the Turntable, then press up on the Turntable Foot Pedal to move the Turntable counterclockwise.
Make any necessary adjustments and then proceed.
Eventually the top Bead slips under the Rim. How long this takes can vary, based on the Tire you
are mounting. Some Tires are more difficult than others.
⚠
CAUTION
R76 Series of Tire Changers
Do not use excessive force
you are holding down the Turntable Foot Pedal, do not try to force it to
continue. Using excessive force can damage the Tire, Wheel, or the Tire
Changer and voids the Warranty.
48
. If the Turntable slows and then stops while
P/N 5900346 — Rev. C — Dec. 2019