Ranger R76LT Installation And Operation Manual page 33

Turbo-Blast™ Bead Sealing System
The Turbo-Blast Bead Sealing System, located on the back of the Tire Changer, provides a very strong
blast of pressurized air that is useful for sealing a stubborn bead.
The system includes:
• Pressurized Air Tank. Holds the pressurized air, enough for multiple blasts of pressurized air.
• Intake Lever. When open, air from the incoming air source goes into the Pressurized Air Tank.
When closed, no air can get into the tank.
• Pressure Relief Valve. Releases air pressure from the tank if the pressure gets too high.
• Hose. Moves the pressurized air from the tank to the Nozzle.
• Nozzle. Where the pressurized air comes out.
⚠
DANGER
• Handle. Gives you an easy way to position the Nozzle.
• Button. Press to release a powerful blast of air.
Not necessarily to scale.
R76 Series of Tire Changers
Use extreme care with the TurboBlast Bead Sealing System. You could cause
product damage, personal injury, or death. Never point the Nozzle at a person or
thing. Do not use the TurboBlast System for anything except sealing a bead.
Use both hands
33
.
P/N 5900346 — Rev. C — Dec. 2019