Ranger R76LT Installation And Operation Manual page 29

Main Tower
The Main Tower holds the main Tire Changer tool, the Mount/Demount Head. It tilts back out of the
way when you do not need it.
Side view. Not necessarily to scale. Not all components shown.
The main parts of the Main Tower are:
• Mount/Demount Head. Attaches to the Bottom of the Shaft. The entire purpose of the Main
Tower is to let you get the Mount/Demount Head to where you need it.
• Shaft. Moves the Mount/Demount Head up and down.
• Slide. Moves the Mount/Demount Head in and out.
• Control Button. When pressed on the outside, locks the Shaft and Slide at their current
positions. When pressed on the inside, unlocks the Shaft and Slide.
• Shaft Cap. Use it to move the Mount/Demount Head down. Do not grab the Shaft Spring or the
part of the Shaft just above the Mount/Demount Head; they are not for controlling the Shaft height.
• Shaft Spring. Automatically pushes the Shaft back up when you unlock the Shaft using the
Control Button.
• Adjustment Handle. Moves the Slide in and out.
• Main Tower. Tilts backwards and forwards. Controlled by the Tilt Back Foot Pedal. Press down
and release on the Tilt Back Foot Pedal to move the Main Tower back (if it is forward) or forward (if
it is back).
R76 Series of Tire Changers
29
P/N 5900346 — Rev. C — Dec. 2019