Christie Boxer 4K30 Manual page 6

19. Remove the two screws from the bottom of the integrator focus module to disengage it from
the bottom of the projector.
20. Remove the four screws from the front of the integrator focus module connecting it to the
zoom and focus module.
21. Slide the integrator module out the side of the projector.
Installing the harness connector backplates to
the integrator front bracket
Install the harness connector backplates to the integrator front bracket and if required, replace the
integrator front bracket and connector mounting brackets.
1. If the integrator front bracket does not have the contingency mounting holes, replace it
(011-106558-XX) and the connector mounting brackets (011-105941-XX) from the Boxer
Harness Connector kit.
Installing the Boxer Harness Connect Backplates Instruction Sheet
020-102015-01 Rev. 1 (10-2015)
Installing the Boxer harness connector backplates
6