Miele SmartLine CS 7632 Operating And Installation Instructions page 39

Problem
1 and a number, e.g. 1-0
flash alternately with a 3
digit number in the
timer display.
 alternating with
numbers flashes in the
timer display.
Possible cause and remedy
Heating element malfunction
 Interrupt the power supply to the SmartLine
appliance for approx. 1 minute.
 If the problem persists after power is restored,
please contact Miele.

The overheating protection mechanism has been
activated.
 See "Safety features - Overheating protection".
,  or 
The fan is blocked or defective.
 Make sure it has not been blocked by something,
for example a fork. Remove the cause of the
blockage.
 If this fault code continues to appear in the
display, contact Miele.
 and other numbers
There is a fault in the electronic module.
 Interrupt the power supply to the SmartLine
appliance for approx. 1 minute.
 If the problem persists after power is restored,
please contact Miele.
Problem solving guide
39