Operation; Operating Principles - Miele SmartLine CS 7632 Operating And Installation Instructions

Teppanyaki
Hide thumbs Also See for SmartLine CS 7632:
Table of Contents

Advertisement

Operation

Operating principles

This SmartLine appliance is equipped
with electronic sensor controls which
react to finger contact. For safety
reasons, in order to switch the
appliance on, the On/Off  sensor
needs to be touched for a little longer
than the other sensors.
Each time you touch a sensor, an
audible tone sounds.
Only the printed On/Off  symbol is
visible when the SmartLine appliance is
switched off. The other sensor controls
light up when the SmartLine appliance
is switched on.
Malfunction due to dirty and/or
covered sensor controls.
If the sensor controls are dirty or
covered this could cause them to fail
to react, to activate a function or
even to switch the appliance off
automatically (see "Safety features -
Safety switch-off"). Placing hot pans
on the sensor controls/indicators can
damage the electronic unit
underneath.
Keep the sensor controls and
indicators clean and do not place hot
pans or anything else on top of them.
20
The Teppanyaki is divided into two
cooking zones that can be switched on
and controlled separately. The entire
area can be used when frying food or
keeping large quantities of food warm.
For smaller quantities, the rear zone can
be used for frying food whilst the front
area can be used for keeping food
warm with the keeping warm
function .

Advertisement

Table of Contents
loading

Table of Contents