Setting The Power Level; Switching Off; Residual Heat Indicator - Miele SmartLine CS 7632 Operating And Installation Instructions

Teppanyaki
Hide thumbs Also See for SmartLine CS 7632:
Table of Contents

Advertisement

Risk of fire due to overheated
food!
Unattended food can overheat and
ignite.
Do not leave the Teppanyaki
unattended whilst it is being used.
Please note that the heating-up time
is very short with induction heating.
Switching on the Teppanyaki
 Touch the  sensor.
Further sensor controls will light up. If
no further entry is made, the appliance
will switch itself off after a few seconds
for safety reasons.

Setting the power level

 Touch the sensor control for the
desired power level on the respective
numerical keybank.

Switching off

 To switch off a cooking zone, touch
the 0 sensor for that zone on the
numerical keybank.
 To switch off the Teppanyaki, i.e. both
cooking zones, touch the  sensor.

Residual heat indicator

If the SmartLine appliance is still hot,
the residual heat indicator will light up
after it has been switched off.
Depending on the temperature, a dot
will appear above power levels 1, 2 and
3.
The dots of the residual heat indicator
go out one after the other as the
SmartLine appliance cools down. The
last dot only goes out when the
SmartLine appliance is safe to touch.
Risk of burning due to hot
surfaces.
The surfaces will be hot after use.
Do not touch the surfaces while the
residual heat indicators are on.
Operation
21

Advertisement

Table of Contents
loading

Table of Contents