Related Manuals for Miele HR 1956-1
Summary of Contents for Miele HR 1956-1
- Page 1 Installation Instructions Range Cooker It is essential to read all instructions supplied before installing and using the appliance. This prevents both personal injury and damage to the appliance. en-GB M.-Nr. 11 170 370...
- Page 2 For use in other countries, please contact Miele in your country. Deadly danger from tipping! If the Range Cooker is not yet secured it could tip over and fatally injure children or adults.
- Page 3 Gas-heated appliances Safety precautions to take if you smell gas Turn off the gas emergency control valve immediately. This is usually located near the gas meter. Eliminate all sources of ignition in a safe manner. Do not smoke, light cigarette lighters or matches. ...
-
Page 4: Table Of Contents
Contents Important installation information ............... 2 Warning and Safety instructions................ 6 Caring for the environment ................ 14 Features........................ 15 Model numbers ..................... 15 Data plate ......................15 Distance to the Range Hood ................. 15 Items supplied with the Range Cooker ..............16 Fitting the plinth cover.................. - Page 5 Contents Burner output....................... 46 Service........................ 48 Contact in case of malfunction ................48 Data plate ......................48 Warranty ........................ 48 Conformity declaration .................. 49...
-
Page 6: Warning And Safety Instructions
This prevents both personal injury and damage. Miele cannot be held liable for damage caused by non-compliance with these instructions. Keep the installation instructions and the operating instructions in... - Page 7 Warning and Safety instructions Correct application This Range Cooker is intended for domestic use and use in other similar environments. This Range Cooker is not intended for outdoor use. The Range Cooker is exclusively for use under normal domestic conditions: –...
- Page 8 Warning and Safety instructions Safety with children Children under eight years of age must be kept away from the Range Cooker unless they are constantly supervised. Children should be supervised in the vicinity of the Range Cooker. Never allow children to play with the Range Cooker. ...
- Page 9 Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and repairs must only be carried out by a Miele authorised technician. Do not lift or carry the Range Cooker by the oven door handle or control panel.
- Page 10 Warning and Safety instructions If the plug is removed from the connection cable or if the cable is supplied without a plug, the Range Cooker must be connected to the electrical supply by a suitably qualified electrician. Before connecting the Range Cooker to the mains supply, ensure that the connection data on the data plate (voltage and frequency) match the mains electricity supply.
- Page 11 Miele authorised service technician. Otherwise the warranty is invalidated. Miele can only guarantee the safety of the appliance when genuine original Miele replacement parts are used. Faulty components must only be replaced by Miele spare parts.
- Page 12 Warning and Safety instructions Cleaning and care The steam from a steam cleaning appliance could reach electrical components and cause a short circuit. Do not use a steam cleaner to clean the Range Cooker. Scratches on the door glass can result in the glass breaking. Do not use abrasive cleaners, hard sponges, brushes or sharp metal tools to clean the door glass.
- Page 13 Using accessories or spare parts from other manufacturers will invalidate the warranty and Miele cannot accept liability. Only use the Miele food probe supplied with this oven. If it is faulty, it must only be replaced with a suitable original Miele food probe. ...
-
Page 14: Caring For The Environment
/ recycling centre for electrical and electronic appliances, or contact your dealer or Miele for advice. You are also responsible (by law, depending on country) for deleting any personal data that may be stored on the appliance being disposed of. -
Page 15: Features
Range Hood, each (voltage, frequency and maximum rated with a different safety clearance, the load). largest clearance must be used. Please have this information to hand, should you need to contact Miele regarding any questions or problems. -
Page 16: Items Supplied With The Range Cooker
Features Fitting the plinth cover Items supplied with the Range Cooker The plinth cover has sheet metal lugs and magnets by means of which it can Items supplied will vary depending on be positioned and attached to the model: base of the Range Cooker. –... -
Page 17: Optional Accessories
RBS backsplash panel Range Cooker The backsplash panel is designed for Depending on the model, you can connecting to a Miele Range Hood. exchange the existing edge profile on Please observe the installation your appliance for a taller wall panel. -
Page 18: Notes On Installation
Notes on installation Do not lift or carry the Range Cooker by the oven door handle or control panel. The Range Cooker is heavy. Due to the size and weight of the appliance, installation should be performed by two people. Weight Model Gross weight... -
Page 19: Location
Notes on installation Location This Range Cooker is not intended for outdoor use. To ensure the safe installation of the appliance and to guarantee its correct functioning, the floor to the niche where the appliance is to be installed must be smooth and even. -
Page 20: Safety Instructions For Installation
Safety instructions for installation A gas hob must not be installed directly next to a deep fat fryer as the gas flames could ignite the fat in the fryer. It is essential to maintain a distance of at least 300 mm between these two appliances. -
Page 21: Dimensioned Drawings For Dual Fuel Range Cookers
Dimensioned drawings for Dual Fuel Range Cookers , , The hatched area represents the installation area for service connections: E = Electrical connection, G = Gas connection Position Dimensions Description 902 - 940 mm Distance from the floor to hob surface ... - Page 22 Dimensioned drawings for Dual Fuel Range Cookers HR 1936-1 When two or more appliances which have different safety distances are installed together below a cooker hood, you should observe the greatest safety distance. Position Dimensions Description 915 mm Niche width 760 mm Required safety distance in the absence of instructions from the cooker hood manufacturer...
- Page 23 Dimensioned drawings for Dual Fuel Range Cookers HR 1956-1 When two or more appliances which have different safety distances are installed together below a cooker hood, you should observe the greatest safety distance. Position Dimensions Description 1220 mm Niche width 760 mm Required safety distance in the absence of instructions from the cooker hood manufacturer...
-
Page 24: Detailed Views Of Hr 1936-1
Dimensioned drawings for Dual Fuel Range Cookers Detailed views of HR 1936-1 Side view of HR 1936-1 (x) = depends on the appliance height adjustment: 127 mm–165.1 mm... - Page 25 Dimensioned drawings for Dual Fuel Range Cookers Detailed front side view of HR 1936-1...
- Page 26 Dimensioned drawings for Dual Fuel Range Cookers Front side view of HR 1936-1 (x) = depends on the appliance height adjustment: 127 mm–165.1 mm...
- Page 27 Dimensioned drawings for Dual Fuel Range Cookers Rear side view of HR 1936-1 E = Electrical connection G = Gas connection...
-
Page 28: Detailed Views Of Hr 1956-1
Dimensioned drawings for Dual Fuel Range Cookers Detailed views of HR 1956-1 Side view of HR 1956-1 (x) = depends on the appliance height adjustment: 101.6 mm–139.7 mm... - Page 29 Dimensioned drawings for Dual Fuel Range Cookers Detailed front side view of HR 1956-1...
- Page 30 Dimensioned drawings for Dual Fuel Range Cookers Front side view of HR 1956-1 (x) = depends on the appliance height adjustment: 101.6 mm–139.7 mm...
- Page 31 Dimensioned drawings for Dual Fuel Range Cookers Rear side view of HR 1956-1 E = Electrical connection G = Gas connection...
-
Page 32: Anti-Tip Device
Anti-tip device Before installation It is a good idea to remove the door (see “Removing the door” in the oven WARNING instruction manual) and to remove the Children and adults can tip over the accessories before installing the Range Cooker if has not been appliance. -
Page 33: Checking The Installation Space
Anti-tip device Checking the installation space Install the anti-tip device on a base capable of bearing significant weight, such as a concrete floor, concrete wall or timber framing. The surface must be flat and level. If the rear of the Range Cooker has distance A to the supporting wall due to unevenness or wall covering (e.g., tile level), you must install the anti-tip device to the supporting floor. -
Page 34: Standard Supplied Accessories
Anti-tip device Check building drawings for supply cables and pipework. Make sure that you do not damage any cables or pipework when drilling the holes to attach the anti-tip device. Check the position of the electric, gas and plumbing connections (see “Electrical connection,”... -
Page 35: Installation Dimensions Of Locking Bolt
Anti-tip device Installation dimensions of locking bolt Anti-tip device, front view Model Width HR 1936-1 915 mm 97 mm HR 1956-1 1220 mm 82 mm Securing to the floor Installing the Range Cooker with the anti-tip device Wear safety shoes and protective gloves. The anti-tip device should be installed at the back of the Range Cooker, half way along the bottom edge. - Page 36 Anti-tip device Do not push the Range Cooker Complete all necessary connections into position until all supply for the Range Cooker. Read the connections have been made. information in the “Electrical connection” and “Gas connection” sections. The plinth cover is attached to the base of the Range Cooker by The Range Cooker can be damaged magnets.
- Page 37 Anti-tip device In the Range Cooker housing, there is an opening for the bolt of the anti- tip device. The opening allows the Range Cooker to be pushed onto the anti-tip device and back to the wall. The locking clamp must noticeably engage with the bolt ...
-
Page 38: Disconnecting The Range Cooker From The Anti-Tip Device
Anti-tip device Disconnecting the Range Cooker from the anti-tip device WARNING Children and adults can tip over the Range Cooker if has not been secured. This may lead to fatal injuries. If you need to remove the Range Cooker from its installation space, e.g. for service, you first need to disconnect it from the anti-tip device. -
Page 39: Electrical Connection
Ensure that these match the mains must be carried out by a suitably supply. qualified and competent person in When contacting Miele, please quote accordance with local and national the following: safety regulations. Ensure power is not supplied to the appliance until –... - Page 40 Electrical connection Wiring diagram Range Cooker This Range Cooker is supplied with an 3N AC 380– approx. 1.7m long cable. It must be 415 V connected in accordance with the wiring diagram. 400 V 400 V 220– Maximum connected load: see data 240 V 220–240 V plate.
- Page 41 Electrical connection The following fuses are required: Type 3 phase electrical 1 phase electrical connection connection HR 1936-1 16/16/16 A 20 A HR 1956-1 20/20/20 A 45 A...
- Page 42 Electrical connection HR 1956-1: Electrical connection AC 230V supply conversion The electrical connection can be converted. The ferrite ring must be used with both the three phase and single phase supplies in accordance with the diagrams below. 3N AC 230V supply a 1 x ferrite ring b PE (green/yellow) c N (blue)
-
Page 43: Gas Connection
Gas connection For any gas work in the UK always Connection to the gas supply must use a Gas Safe registered engineer. be carried out in strict accordance with local and national safety regulations. (Gas Safe in the UK). Every appliance should have its own easily accessible isolating valve and ... -
Page 44: Functional Check
Gas connection This hob is a class 1 and 2, sub Connection on the Range category 1 appliance and is suitable for Cooker use with natural gas. The gas connection point on the Range Category in acc. with EN 30 Cooker has a conical ½" thread (R½"... -
Page 45: Jet Table
Jet table Natural gas Main jet Simmer jet Small jet Small jet Code Code Code Code Medium 1.00 0.60 0.75 0.50 burner Large burner 1.23 0.65 0.88 0.57 Extra large 1.39 0.64 0.88 0.65 burner Griddle burner 1.55 –... -
Page 46: Burner Output
Burner output Nominal ratings of HR 1936-1 (Natural gas H G20, 20 mbar) Burner Gas type Highest setting Lowest setting Medium Natural gas H – 0.40 burner Large burner Natural gas H – 0.45 Extra large Natural gas H – 0.55 burner Griddle plate Natural gas H –... - Page 47 Burner output Nominal ratings of HR 1956-1 (Natural gas H G20, 20 mbar) Burner Gas type Highest setting Lowest setting Medium Natural gas H – 0.40 burner Large burner Natural gas H – 0.45 Extra large Natural gas H – 0.55 burner Griddle plate Natural gas H –...
-
Page 48: Service
The data plate is located behind the cannot remedy yourself, please contact plinth cover. The plinth cover is your Miele Dealer or Miele Service. attached to the plinth of the Range Cooker by magnets so it can be Contact information for Miele Service removed and put back again easily. -
Page 49: Conformity Declaration
Conformity declaration Miele hereby declares that this Range Cooker complies with Directive 2014/53/EU. The complete text of the EU declaration of conformity is available from one of the following internet addresses: – Products, Download from www.miele.co.uk – For service, information, operating instructions etc: go to www.miele.co.uk/domestic/... - Page 51 Tel: +65 6735 1191 Fax. +971 4 3418 852 Fax: 011-46 900 001 Fax: +65 6735 1161 800-MIELE (64353) E-mail: customercare@miele.in E-Mail: info@miele.com.sg E-Mail: info@miele.ae Internet: www.miele.in Internet: www.miele.sg Website: www.miele.ae Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany...
- Page 52 HR 1936-1, HR 1956-1 en-GB M.-Nr. 11 170 370 / 00...