Table of Contents
Advertisement
Timer
The SmartLine appliance has to be
switched on if you wish to use the timer.
A duration of between 1 minute (:)
and 9 hours 59 minutes (:) can be
set.
Durations of up to 59 minutes are
shown in minutes (00:59) and durations
of more than 60 minutes are shown in
hours and minutes. Times are entered in
the order of hours, followed by minutes
in tens and then units.
Example:
59 min = 00:59, entry: 5-9
80 min = 1:20, entry: 1-2-0
After the first number has been entered,
the timer display will light up constantly.
After the second number has been
entered, the first number will move to
the left. After the third number has been
entered, the first and second numbers
will move to the left.
The timer can be used for the following
2 functions:
– For setting the minute minder
– For automatically switching off a
cooking zone/heating element/
Teppanyaki zone.
24
The functions can be used at the same
time. The shortest time is always
displayed and the sensor control
(minute minder) or the indicator light for
automatic switch-off pulsates.
Touch the or sensor control if you
want to show the times remaining
counting down in the background. If
more than one switch-off time is
programmed, touch the sensor
control repeatedly until the
corresponding indicator light pulsates.
Minute minder duration
The minute minder is set using the left
or front left numerical keybank
(depending on model).
Setting the minute minder
Touch the sensor.
The timer display will start to flash.
Select the time you require.
Changing the time set for the minute
minder
Touch the sensor.
Select the time you require.
Cancelling the minute minder
duration
Touch the sensor until :
appears in the timer display.
Advertisement
Table of Contents
