Advertisement
87. Reinstall the coolant overflow hose onto the thermostat
housing fitting using the factory hose clamp.
88. Using one (1) 3/4" hose clamp from bag #3, secure the
LTR to manifold hose to the inlet port on the supercharger
manifold.
89. Install the factory EVAP solenoid onto the top of the nose
inlet using the factory bolts, factory O-ring and an 8mm
socket.
90. Install the factory EVAP hose onto the EVAP solenoid.
©2017 Edelbrock LLC
Part #1584, 15840
Edelbrock Supercharger System
91. Install the stock throttle body onto the throttle body
flange using the factory O-ring, factory bolts and an 8mm
socket.
92. Replace the existing air filter with the new supplied air
filter. Install the silicone elbow onto the throttle body and
the intake box and secure using two (2) worm clamps.
93. Install the supplied driver side PCV hose to the driver
side valve cover and the bottom PCV fitting on the intake
elbow.
94. Reinstall the actuator hose back onto the actuator and
secure the actuator hose to the factory retaining clip located
on the EVAP hose.
Page 21
2011-2014 Ford F-150 5.0L
Installation Instructions
Brochure #63-1584
Rev. 12/11/17 - NP
Advertisement
