Clutch Lever; Handlebars; Front Brake Calliper - RIEJU Tango 250 Chassis Workshop Manual

Removal

28. CLUTCH LEVER

Disconnect the clutch cable (A/F-53) and the choke cable (B/F-53).
Then unscrew the 2 screws (C/F-54) and remove the lever.
A

29. HANDLEBARS

*Remove the controls on each end.
Unscrew the 4 bolts (A/F-55) and remove the
handlebars.

30. FRONT BRAKE CALLIPER

Unscrew the connector using the bolt (A/F-56).
Then unscrew the 2 bolts (B/F-56) securing
the calliper to the front forks.
ATTENTION:
The copper gaskets should be renewed and
the circuit bled when refitting the calliper.
ATTENTION: Brake fluid is corrosive.
B
F-53
C
F-54
A
A
F-55
A
B
F-56
47