52
Removal
41. REAR BRAKE CYLINDER
Unscrew the 2 bolts (A/F-71).
To remove the cylinder it is necessary to dis-
connect the STOP switch (B/F-71) and unscrew
it.
Remove the clamp (C/F-71) from the brake fluid
supply tube and drain into a container.
ATTENTION: Brake fluid is corrosive.
42. KICK-START LEVER
Unscrew the nut (A/F-72) and extract the
lever by pulling it off.
ATTENTION: Refitting the lever in a diffe-
rent position to the original may reduce the
travel during kick-starting.
43. SWINGING ARM
* Remove the chain, the rear brake calliper, the rear wheel and shock absorber.
Unscrew nut (A/F-73) and withdraw the shaft (B/F-74) from the other end.
A
C
A
B
F-73
B
A
F-71
F-72
F-74