Carburettor; Prop-Stand; Front Mudguard - RIEJU Tango 250 Chassis Workshop Manual

Hide thumbs Also See for Tango 250:
Table of Contents

Advertisement

Removal

20. CARBURETTOR

*Remove the seat and the fuel tank.
Loosen the 2 clamps (A/F-40) securing the
carburettor to the filter canister and to the
engine.
Disconnect the throttle cables (B/F-40). Dis-
connect the choke cable (C/F-40).
Then disconnect the suction hose and the
remaining pipes.
ATTENTION: Pay attention to the position of the pipes, to ensure they are refitted
correctly.
21. PROP STAND
ATTENTION: Secure the motorcycle befo-
re carrying out this operation.
ATTENTION: Carry out this operation
with the prop stand folded up.
Remove the tensioning spring (A/F-41).
Then unscrew the bolt (B/F-41).
22. FRONT MUDGUARDS (ENDURO as an example)
Unscrew the 4 bolts (A/F-42), two on each
side, securing the mudguard to the forks.
Withdraw it forwards.
B
C
B
F-40
A
B
F-41
A
F-42
A
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents