Table of Contents
Advertisement
Rieju chassis
Chassis
25. FRONT BRAKE PUMP
Disconnect the micro-switch terminals of the brake light (A/F -45).
Unscrew the join (B/F -45) that holds the tube on to the pump.
After, unscrew the 2 bolts (C/F -46) and remove the front brake pump.
ATTENTION: For the later assembly, it is advisable to replace the copper gaskets and
drain the circuit.
ATTENTION: Brake Liquid is abrasive.
C
B
A
F-45
F-46
26. CLUTCH LEVER
A
C
Disconnect the transmission from the clutch
(A/F -47) and from the starter (B/F -47).
After, unscrew the 2 bolts (C/F -47) and re-
move the lever.
B
F-47
41
Advertisement
Table of Contents
