Exhaust; Ais" System (Secondary Air Valve); Battery - RIEJU Tango 250 Chassis Workshop Manual

34
Removal
6. EXHAUST PIPE
Loosen the clamp (A/F-9) on the connection between the exhaust pipe and the silencer.
Remove the 2 nuts (B/F-10) securing the exhaust pipe to the engine at the front.
ATTENTION: Before removing the exhaust pipe, make sure it has cooled down.
A

7. "AIS" SYSTEM (Secondary air valve)

Disconnected the clamps from the pipes (A/F-11).
Then unscrew the 2 securing bolts (B/F-11).
A
A
B

8. BATTERY

*Remove the seat.
Disconnect the two cables.
Positive (A/F-12) red.
Negative (B/F-12) black.
B
F-9
ATTENTION: Pay attention
to the position of the valve, to
ensure it is refitted correctly. If
it is not fitted correctly, it may
burn out.
F-11
F-10
IN
OUT
B
A
F-12