Front Brake Master Cylinder; Clutch Lever - RIEJU MRX-SMX 50 Chassis Workshop Manual

44
Rieju chassis

32. FRONT BRAKE MASTER CYLINDER

Disconnect the micro-switch terminals of the
brake light.
Unscrew the join (A/F-62) that holds the hose
onto the master cylinder.
After, unscrew the 2 bolts (B/F-62) and remo-
ve the front brake master cylinder.
ATTENTION:
For the later assembly, it is advisable to repla-
ce the copper gaskets and drain the circuit.
ATTENTION: Brake fluid is abrasive.

33. CLUTCH LEVER

Disconnect the transmission from the clutch
(A/F-63) and from the starter (B/F-63).
After, unscrew the 2 bolts (C/F-64) and remo-
ve the lever.
34. HANDLEBAR
* Remove the controls from each end.
Unscrew the 4 bolts (A/F-64) and remove the
handlebar.
Chassis
A
A
C
B
A
B
F-62
F-63
F-64