Regulator; Turn Indicators Control Unit; Central Cdi Unit - RIEJU Tango 250 Chassis Workshop Manual

Removal

12. REGULATOR

*Remove the seat and the left-hand side cover.
Disconnect the regulator from the wiring (A/F-23).
Then unscrew the 2 nuts (B/F-22) to withdraw it.
B
A
F-23

13. TURN INDICATORS CONTROL UNIT

*Remove the seat and the left-hand side cover.
Disconnect the turn indicators control unit
(A/F-24) from the general wiring.
Then extract it from the rubber (B/F-24).
B
A
F-24

14. CENTRAL CDI UNIT

*Remove the seat.
Unscrew the 2 bolts (A/F-25) from the bracket.
Disconnect the central CDI unit (B/F-25) from
A
the general wiring.
B
A
F-25
38