48
Removal
31. REAR BRAKE CALLIPER
Unscrew the connector using the bolt (A/F-57).
Then unscrew the 2 bolts (B/F-57) securing
the calliper to the calliper bracket.
ATTENTION:
The copper gaskets should be renewed and
the circuit bled when refitting the calliper.
ATTENTION: Brake fluid is corrosive.
32. ODOMETER SENSOR
Remove the headlight trim (A/F-58).
Disconnect the sensor (B/F-59) from the wiring.
Remove the clips holding the cable along the length of the chassis.
Remove the bolt securing the bracket (C/F-60).
C
A
F-58
F-60
A
B
F-57
B
F-59