FAAC MASTER-B Manual page 11

12.4.1 Leaf 1 management with MASTER-B or SLAVE-
B board
P2
P1
Using push-button P2, move from LED 1 to LED 2 according to
the type of leaf management you require, as described below.
P2
P1
MASTER-B commands leaf 1
(Default).
P2
P1
12.4.2 Function Logic
P2
P1
P2
P1
In all LEDs OFF status, press and
hold down push-button P1, and
press push-button P2 - LED A begins
to flash.
P2
P1
MASTER-B commands leaf 2
Press push-button P1 again to exit.
In all LEDS OFF status, press push-
button P1.
Led A will light up together with
LED 4.
Press push-button P2, for a choice
of 4 different function logics.
A1 automatic
A2 safety
A3 Step-by-step automatic
A4 Step-by-step semi-automatic
(default)
12.4.3 Pause Times
P2
P1
P2
P1
12.4.4 Opening/Closing Delay
P2
P1
P2
P1
12.4.5 Static Force
P2
P1
P2
P1
24
Press push-button P1 again and
LED B will light together with LED 1.
Press push-button P2, for a choice
of 4 different pausetimes.
B1 5 seconds (default)
B2 10 seconds
B3 20 seconds
B4 30 seconds
Press push-button P1 again and
LED C will light together with LED 3.
Press push-button P2, for a choice
of 4 different delays.
C1 op. 0 sec / cl. 0 sec
C2 op. 2 sec / cl. 2 sec
C3 op. 2 sec / cl. 4 sec (default)
C4 op. 2 sec / cl. 8 sec
Press push-button P1 again and
LED D will light together with LED 3.
Press push-button P2, for a choice
of 4 different static forces.
D1 low
D2 medium low
D3 medium high (default)
D4 high