Structural Specifications; System Configuration - JCM GLOBAL VEGA-RC Twin Series Integration Manual

Electrical Specifications
*
Supply Voltage :
‡
Current Consumption
*. Hot-swapping prohibited (e.g., do not plug connectors in or out while the VEGA Unit's power is ON). The limited power source [Class 2] is required.
†. If there is voltage ripple on the applied voltage, be sure that the minimum voltage has not fallen below 20V DC and make that ripple as smooth as
possible.
‡. Power voltage is input voltage for the VEGA Unit.

Structural Specifications

Weight:
Mounting:
Outside Dimensions:
*. Both vertical and transverse types should be installed at a 90-degree angle to the frame.

System Configuration

Figure 5 illustrates a typical VEGA-RC Twin™ System configuration.
e
a
g
P/N 960-000169R_Rev. A {EDP #217859}
VEGA-RC Twin™ Series Banknote Recycler Integration Guide
Table 4 VEGA-RC Twin Electrical Specifications
VEGA-RC Twin
12V DC ±5%
•
24-36V DC (Minimum: 20V DC/Maximum: 42.5V DC)(option)
•
VEGA-RC Twin 12 with VEGA Unit
Standby = 0.21A (12V DC)
•
Operation = 2.2A (12V DC)
•
Peak = 2.9A (12V DC)
•
:
VEGA-RC Twin 42 with VEGA Unit (option)
Standby = 1.6A-0.11A (24-36V DC)
•
Operation = 1.2A-0.8A (24-36V DC)
•
Peak = 1.7A (24-36V DC)
•
Table 5 VEGA-RC Twin Structural Specifications
Approximately 1.8kg (4lbs.)
*
Horizontal
See "Entire Unit Outside Dimensions" on page 17 of this Manual
f
h
i
Figure 5 VEGA-RC Twin System Configuration
b
c
a) VEGA-RC Twin connected to the VEGA Unit
b) PC (Windows XP/2000/Vista/7)
c) Power Supply (e.g., VM-VEGA, UAC, etc.)
d) Host Machine
d
e) Maintenance Connector (VEGA)
f) Standard Marketplace USB Cable
[to VEGA: Mini "B" Plug/to VEGA-RC Twin: Standard "A" Plug]
g) Interface Connector (VEGA)
h) Power Harness
i) Harness
© 2012, Japan CashMachine Co., Limited
6
†