Time Delay Shutoff - Leica DM Series Manual

Table of Contents

Advertisement

Time Delay Shutoff

The Leica DM 750 is equipped with a time
delay shutoff capability, which automati-
cally turns the illumination off after 2 hours of
no changes in the intensity control.
All four-position nosepiece stands have
Ϙ
the time delay shutoff enabled as a default
(mostly educational applications).
All five-position nosepiece stands have the
Ϙ
time delay shutoff disabled as a default
(mostly clinical applications).
Leica DM 750
Changing the status of the time delay
shutoff
1. Turn the power on.
2. Rotate the intensity control to full high
intensity, then back to full low intensity all
within 5 seconds.
Manual
The LED Illumination will flash to indicate
Ϙ
the time delay shutoff status was changed.
The LED Illumination will flash two times
Ϙ
slowly then stay on when you disable the
Time Delay Shutoff.
The LED Illumination will flash three times
Ϙ
quickly then stay on when you enable the
Time Delay Shutoff.
When you turn the power off and then
turn the power on again, the system will
be in the last Time Delay Shutoff status (Enabled
or Disabled) and you will not see any blinking.
41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dm750

Table of Contents