Complete Condenser Centration
If you have purchased a standard Leica
DM 750 configuration, the condenser has
already been pre-centered by Leica Microsys-
tems. Go on to section "Condenser Aperture"
on page 43.
1. Open the condenser aperture by rotating
the knurled ring on the condenser to the
right.
•
Be sure the condenser is raised to its
highest position
Leica DM 750
2. Draw an "X" on a business card size paper
and place it on the light exit of the micro-
scope stand, so the "X" is centered over the
illumination.
3. Look through the eyepieces and use the
provided tool with the set screws (or
thumbscrews if you have a Leica DM 750
with Koehler illumination) to more accu-
rately center the condenser by observing
the X and centering it in the field of view by
tightening the screws.
Manual
Not centered
Centered
30