Treif PRIMUS smart Operating Manual page 72

Main menu
Presentation
07/2019 244156V03_EN
Description
The full cutting mode is selected.
The slice thickness can be set by
turning the rotary pushbutton.
The entire bread is sliced by press-
ing a Start/Stop button.
The halving mode is selected.
The bread is halved by pressing a
Start/Stop button.
By turning the rotary pushbutton the
sub-functions of the halving mode
can be selected.
The sub-function "Slice mode" is
selected.
The set slice thickness is shown in
the left area of the display.
The set number of slices is shown in
the right area of the display.
The defined number of slices is cut
by pressing a Start/Stop button. The
slice thickness set in the full cutting
mode is used here.
The sub-function "Cut product half" is
selected.
When pressing a Start/Stop button,
the bread inserted is cut up to half.
The sliced half bread then remains in
the infeed chute; the half bread not
cut is pulled with the product feed
holder toward the right to the starting
position. The slice thickness set in
the full cutting mode is used for cut-
ting half the bread.
ADDITIONAL INFORMATION
Additional information may be displayed on the main menu, depending
on the respective machine condition. Refer to the chapter "Additional
information on the display" for additional information.
Furthermore, you can open the menu bar in the main menu to access the
individual menu pages.
Rotary pushbutton functions
Pushing the rotary pushbutton
= halving mode is selected.
Turning the rotary pushbutton
clockwise = increases the
slice thickness.
Turning the rotary pushbutton
counterclockwise = reduces
the slice thickness.
Pushing the rotary pushbutton
= full cutting mode is selected.
Turning the rotary pushbutton
clockwise = the sub-function
"Slice mode" is selected.
Turning the rotary pushbutton
counterclockwise = the sub-
function "Slice product half" is
selected.
Pushing the rotary pushbutton
= switching to the halving
mode
Turning the rotary pushbutton
clockwise = increases the
number of slices to be cut.
Turning the rotary pushbutton
counterclockwise = decreases
the number of slices to be cut.
Pushing the rotary pushbutton
= switching to the halving
mode
Turning the rotary pushbutton
clockwise = the sub-function
"Slice mode" is selected.
Turning the rotary pushbutton
counterclockwise without
function.
61