Transport And Installation; Safety Information About Transport - Treif PRIMUS smart Operating Manual

4. Transport and installation

4.1

Safety information about transport

We recommend that you have the machine installed and connected solely
by your TREIF sales partner. It would be useful if your own maintenance
personnel were present during installation and assembly.
The steps for transport and installation are described in this chapter as well
as the assembly processes that may become necessary from time to time
during the complete service life of the machine.
This chapter covers the following:
Safety information about transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Transport and unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
WARNING
Danger to life from machine tipping over!
The machine can topple over due to incorrect transport; machine damage
/ personal injury is possible.

Make sure that it is not possible for any persons to get injured if the
machine tips over by accident.

When the covers are open, the machine's centre of gravity is very
unfavourable for transport.
The machine may only be moved when all covers are properly
closed.

When moving the machine on a slope greater than 5°, the transport-
ing personnel must always be located on the opposite side of the
machine in relation to the rolling direction in the event of breaking
away.
W_010-00
29