Start-Ups; Initial Start-Up - Treif PRIMUS smart Operating Manual

Start-ups

6.2

Start-ups

07/2019 244156V03_EN
CAUTION
Crushing hazard from closing covers!
Limbs can be crushed by covers closing on their own.

Always open covers completely so that they contact the limit stop.
A distinction is made between the following types of start-up.
-

Initial start-up

- Restart
- Start-up after EMERGENCY STOP
These different start-up methods are described below. The procedure for
switching off the machine is described below.
6.2.1 Initial start-up
Initial start-up is performed after the machine has been delivered.
The machine must have been completely installed. Details can be found in
chapter  "Installation and connection" on page 31 and below. Installation
includes:
- Unpacking the machine
- Assembling the components
- Making the electrical connections.
1. Check whether the machine has been set up properly.
2. Check whether all safety covers are in place, properly secured and
without damage.
3. The machine must have been set up. Details can be found in chapter
 "Set-up" on page 33 and below.
Set-up includes:
- The blade is mounted and runs freely.
4. Check whether the machine has been set up properly.
5. Carry out a function test of the safety switches ( "Functional test of
the safety switches" on page 41).
- The machine is operational.
V_006-01
39