Set-Up; Safety Instructions For Set-Up - Treif PRIMUS smart Operating Manual

5. Set-up

5.1

Safety instructions for set-up

The information and instructions for setting up the machine can be found in
this chapter. It is addressed to the personnel responsible for setting up the
machine.
This chapter covers the following:
Safety instructions for set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Installing the blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Installing the blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
DANGER
Danger from electrical voltage!
The main power supply must be interrupted and secured against unintend-
ed switching on again during all installation work on the machine as soon
as the type of work allows to do so.

Unplug the mains plug and deposit in a safe place!
WARNING
Risk of injury from improper setup work!
Improper setup may cause significant machine damage and put persons at
risk.

Setup work may therefore be performed only by trained and author-
ized personnel!

Do not put the machine into operation until all setup components
have been adjusted and matched to each other as described!
G_003-04
W_012-02
33