Table of Contents
Advertisement
Functional test of the safety switches
07/2019 244156V03_EN
Front door
Actions in case of malfunction!
If there is any malfunction, the machine must be switched off immediately
and secured against unintended switching on. Also unplug and secure the
mains plug.
Only restart the machine when this error has been remedied by
TREIF Customer Service!
1. Press the START/STOP button.
-
The cutting process begins (blade rotation).
2. Open the door handle (1) of the front door (2)
-
The machine must switch off if the door is opened by max. 8 mm.
-
The knife and product feed holder must stop immediately.
3. Close and lock the front door ( "Closing front door:" on page 87)
NOTICE
H_042-05
43
- Quick Links:
- If a Malfunction Occurs
- If any Fault Occurs
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PRIMUS smart and is the answer not in the manual?