Slice Product Half With Previously Set Slice Thickness - Treif PRIMUS smart Operating Manual

Slice product half with previously set slice thickness

7.5

Slice product half with previously set slice thickness

07/2019 244156V03_EN
The machine is operational. The product feed holder is in clamping posi-
tion.
1. Insert the product ( "Inserting the product" on page 50).
2. Set the desired slice thickness by turning the rotary pushbutton.
3. Press the rotary pushbutton.
- The machine switches to halving mode.
4. Turn the rotary switch anticlockwise.
- The "slice product half" function is displayed.
5. Press the desired START/STOP button.
- The product half is sliced with the specified slice thickness.
6. Remove the cut product from the removal chamber.
7. Place it on the bagging plate.
8. Package the product.
55