Slicing The Product - Treif PRIMUS smart Operating Manual

Inserting and cutting product
07/2019 244156V03_EN
7.4.2

Slicing the product

ADDITIONAL INFORMATION
Not all products can be sliced with the desired quality at double knife
speed.
The machine is operational. The product feed holder is in clamping posi-
tion.
1. Insert the product ( "Inserting the product" on page 50).
2. Set the required slice thickness by turning the rotary switch.
- Turning the rotary pushbutton switch clockwise (a) = increases the
slice thickness.
- Turning the rotary pushbutton counterclockwise (b) = reduces the
slice thickness.
3. Press the desired START/STOP button.
- START/STOP eco button (1): The machine slices with a lower knife
speed with lower energy consumption and lower noise emission.
- START/STOP button (2): The machine slices with double knife
speed with increased energy consumption and increased noise
emission.
- The cutting process begins. The product is sliced completely.
4. Remove the cut product from the removal chamber.
5. Place it on the bagging plate.
6. Package the product.
I_024-00
51