Enwork Grid XTB Installation Instructions Manual page 7

Take special notice to link orientation. Slots
STEP 3: ASSEMBLE 2-PACK
must face towards the outside of the
GRID BASES
assembly in all mid run conditions, and in all
end of run conditions where an end panel
will be installed. In end of run conditions
where there will be no end panel, the slots
must face toward the inside of the assembly.
M8 Flange Nut
(qty 8)
End of Run,
WITHOUT End Panel
M8 Flange Nut
Mid Run, or End of
Run WITH End Panel
6