Sensor On/Off; Battery Life - Data Harvest EASYSENSE Q3+ User Manual

EASYSENSE Q3+ and Q5+
Use the blue (▲▼) buttons to scroll the menu until the pointer is pointing at
•
System. Press the green
Use the blue (▲▼) buttons to scroll the menu until
•
the pointer is pointing to the appropriate system
menu item. Press the green ►button to select.

Sensor ON/OFF

The built-in sensors can be switched On or Off the display e.g. Sound and Temperature
switched off so only Light measurements are displayed.
Use the blue (▲▼) buttons to scroll the menu until the
pointer is pointing at the appropriate Sensor. Press the
green ► button to alter the selection from On to Off or
visa versa.
Press the red button to return to the System menu.
If a hard reset is performed (page 39) it will automatically return all sensors to On.

Battery life

Note: If EASYSENSE Q has been on charge, disconnect the power
supply and/or USB cable for at least 15 seconds before checking
values.
EASYSENSE Q will determine the power requirements of the connected sensors and
compare this with the charge level of the batteries. Bluetooth communication will
increase power consumption, so if you are using Bluetooth make sure it is switched on
before checking battery life.
The LCD will display an estimate of:
1. Battery life Awake – the number of hours EASYSENSE Q could continuously
operate without a power supply attached.
2. Easy Log – if EASYSENSE Q is set to record in Easy Log mode and is operating on
battery power, it will auto switch off between samples to reduce battery consumption.
Battery life Easy Log indicates the theoretical number of days that EASYSENSE Q
could record in this mode.
3. The percentage capacity charge level of the battery.
The LCD display will show 'Battery is charging' if power is being supplied to
EASYSENSE Q (via a power supply or USB connection).
Press the red button to return to the System menu.
Note: Ideally EASYSENSE Q should be stored with at least 40% or more charge. Do not store
EASYSENSE Q with its battery fully discharged or with sensors connected. Some reserve charge is needed
to retain data and settings in memory. See page 26 for powering information.
© Data Harvest Group Ltd.
► button to select.
17
DO185 (2)
No Bluetooth
► Sensor ON/OFF
Battery life
► Sound Off
Light On
Temperature Off
Battery life:
Awake: 13.5 hours
Easy Log: 42 days
Level: 93%