Data Harvest EASYSENSE Q3+ User Manual page 34

EASYSENSE Q3+ and Q5+
Notes:
•
The EASYSENSE Q logger is identified by its serial number, which is written on the base of the
logger and shown on the LCD display (when Pair Bluetooth is selected).
•
EASYSENSE Q will attempt to pair with Bluetooth device for 2 minutes. If you have taken more
than 2 minutes EASYSENSE Q may show a 'Pairing failed' message. Press the red button on
EASYSENSE Q, to exit the Pair Bluetooth menu and then press the green button to select again.
Click on Search Again in the Device Wizard.
12. You will then be asked if a Passkey
is required. Click on "Use the
passkey found in the
documentation" (E).
13. Type 1234 in the passkey
14. Click Next.
15. There will be short pause as passkey information is
exchanged between the computer and EASYSENSE
Q; the screen will show a check list for each stage.
When the exchange has taken place and is successful
the final page of the wizard will be shown.
Windows XP will assign COM ports.
EASYSENSE Q will communicate
with the computer (and therefore the
EASYSENSE software) over the
'Outgoing COM port. Make a note of
the 'Outgoing COM port' number
(G).
If the Outgoing COM port number is
not shown in this window, it will
need to be added manually – see
page 37.
The LCD screen on EASYSENSE Q will show the
electronic identity number of the Bluetooth adapter it has
paired with. Bluetooth will be automatically switched on
(LED will be lit).
16. Click on Finish to close the wizard.
© Data Harvest Group Ltd.
(E)
(F).
34
DO185 (2)
Pair Bluetooth
ID: 060929-01071
Passkey: 1234
Paired: 00461878A78
(F)
(G)